Image is not available
TCS 700 SPD Rotary Meter
This standard petroleum ductile iron meter is available in sizes 2", 3" & 4".
Image is not available
Slider

The 700 SPD rotary flow meter is designed to meter refined petroleum products such as aviation gasoline, ethanol blends, methanol blends, gasoline, fuel oils, diesel, bio-diesel, kerosene, vegetable oils, soy oil, etc. It is available in 2" to 4" sizes.

Specifications

700 SPD Meter Specific

  • Housing: Ductile Ironnew 700 cutaway 2
  • Rotors: Ni-Resist
  • Rotor Journals: Plated Stainless Steel
  • Bearing Plates: Ni-Resist
  • Bearing Sleeves: Carbon Graphite
  • Timing Gears: Stainless Steel
  • Packing Seal: Simriz*
  • Body O-ring: FKM

All 700 Meters

  • Flow: Capable of up to 1,000 GPM (3,785 LPM);  Bi-directional Flow
  • Linear Accuracy: Capable of ± 0.15% of over the full flow range
  • Repeatability: Capable of 0.02% (constant operation conditions with 700SP meters & mechanical registration, using 1 CPS test fluid)
  • Viscosity: Will accurately measure liquids up to 1,500,000 SSU (325,000 CPS)
  • Temperature: - 40 to 160°F (- 40 to 71°C)

*Simriz is a registered trademark of Freudenberg-NOK

Sizes

  • TCS 700-20

    Flange Connections: 2” NPT Flange; 1 1/2” Option
    The 700 2" rotary flow meter is engineered to meter liquid at up to 100 GPM (380 LPM).
  • TCS 700-25

    Flange Connections: 2” NPT Flange
    The 700 2" rotary flow meter is engineered to meter liquid at up 150 GPM (567 LPM).
  • TCS 700-30

    Flange Connections: 3” NPT Flange; 2” Option
    The 700 3" rotary flow meter is engineered to meter liquid at up to 200 GPM (760 LPM).
  • TCS 700-35

    Flange Connections: 3” NPT Flange
    The 700 3" rotary flow meter is engineered to meter liquid at up to 300 GPM (1,135 LPM).
  • TCS 700-40

    Flange Connections: 4” NPT Flange; 3” Option
    The 700 4" rotary flow meter is engineered to meter liquid at up to 500 GPM (1,893 LPM).
  • TCS 700-45

    Flange Connections: 4” NPT Flange
    The 700 4" rotary flow meter is engineered to meter liquid at up to 600 GPM (2,271 LPM).

NPT flanges are standard. BSPT, Slip Weld, ANSI and others available upon request 

Certifications

Don't see the regulatory approval you need? Contact us. TCS is continually adding to this list. Approvals could be available for a comparable meter, in final approval stages, or simply not added to the website yet.

Accessories

The following accessories are compatible with TCS 700 Standard Petroleum/Ductile Iron Construction (SPD) Meters.

  • TCS 3000 Electronic Register

    The TCS 3000 is a powerful, electronic register designed to transform the way you deliver fuel. It has been engineered to control most vehicle delivery operations. The TCS 3000 can improve your cash flow by allowing the driver to make more deliveries...
  • Mechanical Registration

    This rugged, precise mechanical meter register is designed for all kinds of liquid inventory and delivery operations. This register totalizes and displays high-speed deliveries and transactions in large, easy-to-read figures. It features a highly vis...
  • Pulse Transmitter

    TCS pulse transmitters allow you to send volume data to a remote display, register, computer, or fuel management system (PLC). The glandless pulse transmitter can provide single or dual channel output.The DMP pulse transmitters provide accurate signa...
  • 740 Air Eliminator & Strainer

    Available for Sizes: 2", 3", 4"
    A float and valve design senses and removes free air before it can enter the flow meter. Required for custody transfer applications to ensure the most precise measurement.
  • 747 Bulk Air Eliminator

    Available for Sizes: 3", 4"
    A bulk air eliminator assembly is designed for use in applications where a high volume of free air may enter the measurement storage system. Available with single or dual SP, AF or SS air eliminators and assembled to carbon steel or stainless steel v...
  • 748 Air Eliminator/Strainer (Electronic)

    Available for Sizes: 2", 3", 4"
    An electronic controlled float switch and strainer assembly designed to sense and remove free air before it can enter the flow meter. Efficiently removing air from the truck delivery while minimizing the amount of the residual product released from t...
  • 770 Air Eliminator & Strainer

    Available for Sizes: 4"
    An inline strainer and dual air eliminator for bulk storage facilities. A float and valve design senses and removes free air before it can enter the flow meter. Required for custody transfer applications to ensure the most precise measurement. Electr...
  • 750 Hydraulic Preset Valve

    Available for Sizes: 2", 3", 4"
    A normally closed, hydraulically balanced piston control valve allows for auto-batch preset deliveries. The right angle, two–stage control valve is mechanically linked to Veeder Root Preset Counter.

 

Contact Us

TCS Headquarters
2515 Charleston Place
Fort Wayne, IN  46808
Travel Recommendations

TCS Europe 
3 Faversham Rd
Challock, Ashford TN25 4BQ
United Kingdom

Tel: +1 260.484.0382
Europe Tel: +44 1233 512810
Toll Free: 800.348.4753 (USA Only)
Fax: +1 260.484.9230

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Upcoming Events

NBAA - Scheduling & Dispatching
Feb 2-8, 2018
Long Beach, CA
Booth #2060

WPMA
Feb 20-22, 2018
Las Vegas, NV
Booth #1200

PACE
Feb 22-23, 2018
Kansas City, MO
Booth #TBD

Latest News

TCS Parent Company Murray Equipment Announces Transition to Third Generation

October 5, 2017 - Today, Murray Equipment, Inc. (MEI) has announced that Dan Murray has been named...

TCS Europe

Due to an increasing demand for TCS products in Europe, TCS has opened an office in Europe. We now ...

New Stainless Steel Control Valve

 NEW! Stainless Steel Electronic Control Valve Now offering a 2-stage preset control valve for...